Slide shutter with spring under bend (single bend) AS30

If you wish to use the maximum height…

AluShutter light-weight aluminium Roller shutters and Slide shutters were designed to ensure reliability, short delivery times, quick mounting and user-friendly control. The Alushutter shutters are assembled according to the customer's specifications. As such, they can be applied for various purposes: for instance bodywork,ën, rescue vehicles, vehicle or tool cabinets, machine construction, furniture, replacement of swing doors, etc.

Slide shutter with spring under bend (double bend) AS31

For the maximum installation height and shallow spaces...

AluShutter Schuifluik AS31 is mainly applied in the spaces, where the height of the shutter exceeds the mounting depth! Therefore two bends are used, so that the shutter can be lowered via the back panel. These Slide shutters are provided with a preloaded counter-balancing spring. The maximum surface of the shutter is 0.5 m2²

Slide shutter with spring at rear (single bend) AS40

The special with the spring at the rear…

AluShutter Slide shutter with spring against rear panel, is a special assembly customised for the customer at their request. For this Slide shutter, the depth of the space must exceed the height of the shutter. If this is not the case, you are advised to use the AS41 Slide shutter.

Slide shutter with spring at rear (double bend) AS41

For special customised application…

Slide shutter with spring against rear panel and two pulleys, so that the shutter runs under the roof, but also back alingside the rear panel and is mainly when installation depth is limited.

Specifications

All information at a glance

Anodised T66 aluminium sandwich panel
Height of panel: 34 mm. Thickness: 8 mm. Max. surface door leaf: 2.5 m2.². Weight of door leaf: 10 kg/m2.².
Panel is provided with a plastic continuous sealing to ensure quiet and smooth running and resistance of dust and water.
Sliding blocks: black plastic.
Plastic bends: black plastic.
Side sealing: solid pvs tab and sliding surface with reinforcement of steel.
Bottom sealing: EPDM.
Spring assembly: customised balancing per shutter.
Mounting panels: 2 mm galvanised steel
Different handles/locks: Double plastic lockable handle with strap or bar, built-in handle with cylinder lock, lockable bar lock or recessed pull with no lock.
Maximum width: 2,150 mm
Maximum height: 2,250 mm
Maximum surface: 2.5 m2²
Weight: 10 kg/m2²

Your logo

In order to publicise your company name, we can, at your request, apply your logo on the various types of Alushutter shutters. Please enquire for the possibilities.